SINGER 631 User Manual

Page 49

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

то LUBRICATI; TUB MACHtNB

Use SIN'GKK Oil aixl SlNGl-R Lubricant!

Both are extra quality products especially pre

pared for sewing machines, and siiould always be

used in tlu! сак; of your 631.

Clean fho machine pruiodicnlly as insinreted on

page 91,

ti Pi

Apply a dro)) of oil to each place indicated.

Remove screw' A and lift arm top cover slightly

and slide off toward loft and away from inacbine.
The thread take-up lover must be in its lowest
position.

Apply a small amount of lubricant to the gears

as shown.

A tube of this lubricant can be purchased at your

Singer Sewing Centre,

Never apply Oil to these gear.s.

Swing face plate to left and oil flic places indi

cated.

Open slick! plate and apply a drop of oil to the

hook racciway as indicated.

Close slide plate, replace arm top cover and

close, face plate.