SINGER 631 User Manual
Page 33
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
MliNDING
Zigzag stitdiing is well suited for all typos of
liouschoid metsding. Selector setting BQ provides
a firm, flexible bond for the repair of rents and
tears, and is ideal lor the reinforcement and ai)))!!-
cation of elastie. Stitch length and width are rrigu-
laled according to need,
Uenl or Tear. Trim aw’ay ragged edges. Place
n'inforcomont. Using the multiple stitch zigzag
(BQj follow the, line of the tear bringing the edges
together. Shorten the siitdi length at end.s ami
corners to give extra strength.
^(í,'^
Application of lilastic.
Elastic, such as used in
waist bands, must be
strelrhed as it is applied,
to insure fullness requir
ed in, the garment.
65
SCAI.I.OPING
Dainty scalloped edges are used extensively as self trimming on blouses, dresses, lingerie and child
ren's wear.
Perfectly formed and evenly spaced scallops are produced automatically at Selector Settings 15R and
BS
BR results in a 12-stitdr scallop.
BS
Stitch regulator and lever settings vary the length and depth of the scallop.
After stitdiing, trim seam allowance to less than ’A" and clip info the points between scallops.
Some fabrics may also need notching, for a smooth, evenly turned edge.
Turn, gently roll out scallops between the fingers and press.
When scalloping a shaped or bias edge it i.s best to use an interfacing.
Wlien forming scalloped tmRs, add an extra ’A" to tuck allowance for seaming.