SINGER 631 - Manual (Page 48)

TO RiiMOVIi AND REPLACK BOBBIN CASE
; '■
To dean hook raceway, remove bobbin case as
foliows;
1. Remove throat plate (see page 19) and open
slide plate (see page 13).
2. Unlock bobbin ease by lifting and pnlling
holder to right as shown.
3. Remove bobbin case from madiine.
4. Remove all lint, fluff, loose thread ends or any
other foreign matter which might clog the machine.
95
POSITIONING
STUD
TO REMOVE AND REPLACE BOBBIN CASE
5. Replace bobbin case so that groove under tension spring fits on hook raceway and fork of case
straddles positioning stud,
6. Push bobbin case holder to loft as shown until it .snaps down info lock position,
y. Close bod slide and replace throat plate.
96