SINGER 631 - Manual (Page 34)

'!'he seam guide aids in
attaining uniformity of
seam width, it provides
for stitching to be spaced at any distance between
V»" to l'/<" from the edge of the fabric.
APPLICATIONS
Seams Blind Stifdiing
Top Stitching Decorative Stitching
Tlie attachment is used in connection with a
presser foot.
It is secured to the bed of the machine in either
of the threaded holes to the right of the needle.
■ SHAMS
To guide seam stitdiing straight and iraratlel to
the edge of the fabric, adjust the attachment for
proper .seam width. Align the gnide with the pres­
ser foot. {.Set Selector at AK, lover at 3.)
Pin seam edges and baste if necessary. Hand
basting can be eliminated on oasy-to-handle fabrics.
Place pins with the points toward the seam edge
•so itiey ni]) info the fabric at the stitching lino.
The tiinged presser foot will ride freely over the
points. Guide the fabric edges lightly against the
guide while stitching.
67
SHAMS (Cont'd.)
Curved scams require additional treatment in
handling. A shorter stitch will provide greater
elasticity and strengtii. Set the attachment at an
angle so that the end closcist to the needle acts
as a guide.
TOP STITCHfNG
A simple and practical way to accent the lines
of a garment and at the same time give additional
firmness.
Hither single or multiple rows of slitching can
be ccxpcitly placed along lapels and facing edges,
around coilar.s and podccts and as a hem linish,
A subtle effect may be achieved by using straight
stitching, or a decorative touch may be added by
using any of the attractive stitch patterns accom­
plished with this machine.
I
68