Changing the light bulb, Removing bulb, Replacing bulb – SINGER 5102 User Manual

Page 29

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

• Bobbin and Feed Areas

To clean bobbin and feed areas, remove nee
dle plate, as instructed on page 5. Using soft
cloth or brush, clean area as illustrated.

Replace needle plate, as instructed on page 5.

• Exterior Areas

If necessary, a mild solution of soap and

water may be used on exterior areas to

remove stubborn stains. No other cleaning
liquid or powder should be used.

CHANGING THE LIGHT BULB

CAUTION: Before changing light bulb make sure

you have disconnected power line plug from

socket outlet.

Removing Bulb

CAUTION: This machine is designed to use a 15
watt maximum bayonet base bulb

only.

Replacing Bulb

• Swing open face plate to left.

• Do

not attempt to unscrew the bulb.

• Press it up into the socket and at the same

time turn bulb over in direction shown to

unlock the bulb pin and guide out of socket.

• Press new bulb into socket, with bulb pins en

tering slot of socket.

• Turn it over in direction shown to lock bulb in

position.

• Swing face plate back to right and snap it

closed.