Chapter 5. twin-needle stitching, Procedure, Chapter 5. twin-needie stitching – SINGER 5102 User Manual

Page 26

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Chapter 5. Twin-Needle Stitching

The twin-needle simultaneously produces two

parallel, closely spaced lines of pattern stitch
ing. You can stitch with either one or two col

ours of thread.

Twin-needles No. 2011 must be purchased
separately at your local Sewing Centre.

• Needle Position: .L [JJ A only

I only ^

• stitch Width:

• Stitch Length: .5 - 4 to suit fabric

• General Purpose Needle Plate

• General Purpose Foot

Procedure

• Insert twin-needle.

• Thread as for single-needle stitching,

except

pass thread between

centre

and

back

tension

discs A, and through

left

eye of needle.

• Place second spool of thread on right spool

pin and felt.

• Thread machine in usual way,

except

pass

thread from second spool between

centre

and

front

tension discs B, as shown.

• Thread through remaining points, making

certain to

omit the thread guide above the nee

dle

and pass thread through

right

eye of nee

dle.

A CAUTION: Do not use a stitch width greater than what is recommended. A wider stitch will result in needle breakage.