Chapter 4. basic zig-zag stitching, Needle position selector, Stitch width selector – SINGER 5102 User Manual
Page 22: Adjusting machine stitch to suit your fabric, Setting selectors
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Chapter 4. Basic Zig-Zag Stitching
adjusting machine stitch to suit your fabric
You can do functional as well as decorative zig
zag stitching with your sewing machine.
setting selectors
Before turning selector, make sure needle is out
of the fabric.
For plain zig-zag stitching:
• Needle Position:
«L J»
• Stitch Width:
• Stitch Length: 1-4 to suit fabric
• General Purpose Needle Plate
• General Purpose Foot
NEEDLE POSITION SELECTOR
Before moving selector, make sure needle is out
of the fabric.
Most of your zig-zag stitching will be done In
centre J. needle position.
Left L and right
A
settings are used for special
stitch placement.
STITCH WIDTH SELECTOR
Before turning selector, make sure needle is out
of the fabric.
To produce a plain zig-zag or a decorative
stitch, the stitch width selector is turned from
Its straight stitch position i to any of Its other
four positions. The further you turn the selector
toward the right, the wider your stitch will be.
20