Changing the needle – SINGER W1260 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
MC
MC
MC
CHANGING THE NEEDLE
Always make sure needle is straight.
«.iriar« and see
To ch^k straightness of needle, lay
Iharneedle is straight and parallal as shown ,h above diagrant.
&0
. Needle
Clamp Screw
. Flat side towards
back of machine
Turn hand wheel toward you to raise needle bar to its highest posi-
i^n needle clamp screw and insert -edle upward as ^ar as it win
go, making sure flat side of needle .s towards back of machine as
shown in the above diagram.
Tighten needle clamp screw with screwdriver.
Follow the same procedure for insertion o m
•
To make sore that needle
»nt o,X'’r,Se"ole“ the needle plate as shown in the above
ISrseleotor dial most be set in straight sti.eh needle positior
when checking needle alignment.
¡-„.„„Brtlv inserted
If skipped stitches occur, needle may be incorrectly msertea.