Applications of the zigzag stitch – SINGER W1260 User Manual

Page 19

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

• ENDING SEAM/REMOVAL OF FABRIC

P'^ess the reverse stitch button and

bav-kstitch for a stttches to reinforce the end of the seam

Turn the hand wheel until the take-up lever is in its highest position so'
that the stitch is completed and the threads will pull freely Lift the
nre^er foot and remove the fabric by drawing the threads to tie

^! and

jck keeping them under the foot so as not to bend the needle Cut the

b®®*« of the presser bar. Leave the

thread

ends three

to four inches long.

APPLICATIONS OF THE ZIGZAG STITCH

OVERCASTING
Place the edge of the material underneath the
ooening of the sewing foot and guide raw edge

uiong the center groove of the foot, allowing

stitch to form half on and half off the fabric
The multiple stitch zigzag is a wiser choice for

most

fabrics. See page(

Patiern;

Lenght: 2-4

Width: 4-5

Feed

Oog:.AA.

Pressure: Normal
Foot; All Purpose

Needle Position: 2

SEAMING KNITS

The narrow zigzag can be used in seams of firm
knits for added strength. After sewing, open

Mam and press flat. Tiny zigzag stitches can
hardly be seen and the seam will give when stret

ched.

Pattern: /W\
Lenght: 2

Width: 1-2

Feed Dog:

Pressure: Normal

Foot; All Purpose

Needle Position; 2