Adjusting feed dog height – SINGER W1260 User Manual

Page 11

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

TWIN NEEDLE UPPER THREADING

• Follow threading

instruction

for single needle

with

these exception.

• Place thread, matching or contrasting in color, on both spool pins.
• Draw threads through thread guides as normal, but separate the

threads at the tension.

• Pass on thread through the left disc and one thread through the right

disc.

threads as one until you reach the needle eyes.

ZIGZAG DIAL: Set at desired width between "0" and "3," if you set
dial higher than 3, the needle will hit the needle plate and break

STITCH LENGTH: Set at desired stitch length.

ADJUSTING FEED DOG HEIGHT

’

is used for normal sewing. To raise feed

’ pSon"”

,0 pppe,