SINGER 6104 - Manual (Page 6)

choosing and changing accessories
CHANGING THE NEEDLE
♦ Raise needle to its highest point by
turning
the hand wheel
toward you.
Loosen needle
clamp screw A and remove the needle.
♦ Insert new needle up into clamp B as far
as it will go, with the flat side of the needle
to the back,
♦ Tighten needle clamp screw.
Flat Side to Back
CHANGING PRESSER FEET |
Snap-on Presser Feet
The presser feet furnished with your machine Raise needie to highest position by turning the
snap on and off a common shank. hand wheei
toward you.
Raise presser foot.
To Remove and Replace Foot
ipward as far as 1 b. Then snap down to remove.
mk .3> Press presser foot screw down
firm iy
until
that foot snaps into place.