Needle thread tension is not too tight . 22. 23, Bobbin winder spindle is pushed to right – SINGER 6104 User Manual
Page 40
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Whenever sewing difficulty is encountered, review the sections of the instruction book that
explain the operation you are performing to make sure you are using the machine correctly. If
the problem still exists, the following checklist may help you to correct it.
If you still have difficulties, call your nearest
authorized
Dealer.
What To Do If:
Needle Breaks
Hefer to Page:
Make sure,..
♦
NeecHe i$ fully inserted into needle clamp.................................................... .... ........................... .4
♦ Needle is not being pulled to one side as fabric is removed
from the machine.................................... 18
♦ Presser foot or accessory is securely fastened to presser bar......................................................................... 4
♦ Fabric is not being pulled while sewing causing needle to hit needle plate.............................................. 29
Thread Breaks
Make sure...
♦ Machine Is properly threaded........................................................ .... ........................... ................................13
♦ Needle Is straight and sharp.......................... .... ........................... .... ........................................................... 10
9
Needle thread tension is not too tight..................................................................................................
M,
e Thread
Is
unwinding freely from spool..................................... .... ................................................................ 11
♦ Bobbin case area is free of lint and loose thread ends.......................................* ^
..........................
Machine
Is
Noisy or Sluggish
Make sure...
♦ Bobbin case and feed area are free of lint and loose thread ends............................................................. 36
Fabric Does Not Move Properly
Make sure...
♦ Presser foot or accessory is correctly attached to machine ................................................ .... ...................... 4
♦ Stitch length dial Is correctly set
................................. 16, 22. 28
♦ Lint has not accumulated around feed ........ .................................................. .... ......................................... 36
Skipped Stitches
Make sure...
♦ Needle is straight and sharp .......................................................................................................................... 10
♦ Needle is correct style for machine and size for thread . ...........................................................................8,9
♦ Machine is correctly threaded.............................................. .... ... ................................................................ 13
♦ Needle is securely fastened to needle bar ... ..................................................................................................... 4
Fabric Puckers
M ake sure...
♦ Needle thread tension is not too tight . .
7. 22. 23
Needle thread breaks while winding bobbin
M ake sure...
♦ Machine is correctly threaded.....................................13
♦ Thread is unwinding freely from spool ... ....................... * * 11
Thread does not wind onto bobbin
M ake sure...
♦ Bobbin winder spindle is pushed to right............................ 11