SINGER 6104 User Manual

Page 22

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

The zipper foot is also particuiary suitable for

the construction and insertion of corded seams.

CORDED SEAMS

Needle Position:

Stitich Width:

X ;

i i i

i *

♦ Stitich Length: To suit fabric

♦ General Purpose Needle Plate

♦ Zipper Foot

Making the Welting

• Adjust zipper foot to the left of the needle

as described on page 19.

♦ Fold a strip of fabric cut on the true bias

over a cord of the desired length, with raw

edges even. Lower zipper foot. Stitch close

to the cord, pulling

gently on

the strip, both

in front and in back of the zipper foot

Stitching Welting into Seam

♦ Adjust zipper foot to the

right

of the needle

so that the bulk of the fabric will fail to the

left. Stitch welting to the right side of a sin

gle seam edge: guide the edge of the foot

next to the cord but not too close.

Place the attached, welting over the second

seam edge, and pin or baste together. Place

the work under the foot with the first stitch

ing on top so that you can use it a guide.

Stitch, this time, with the foot as close as

possible to the cord.