To all whom it may concern, Desgription – SINGER 95-100 User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TO ALL WHOM IT MAY CONCERN:
The improper placing or renewal of the Trade-Mark “ S I N G E R ” or
any other of the Trade-Marks of The Singer Manufacturing Company
(all of which are duly Registered Trade-Marks) on any machine that
has been repaired, rebuilt, reconditioned, or altered in any way whatsoever
outside a SINGER factory or an authorized SINGER agency is forbidden.
DESGRIPTION
MACHINE: 95-30 makes the lock stitch and Is designed for sewing
light and medium weight fabrics. It has a gear-driven rotary hook.
The needle bar stroke Is 1-9/64 inches.
The machine is equipped with heavy gear shafts and three plain
bearings for the arm shaft.^^^^
MACHINE 95-100 is the same as Machine 95-80 except that it is
equipped with ball bearings at both ends of the arm shaft, the in
termediate bearing being a plain bearing.
MACHINES 95-80 and 95-100'should be run at- speeds not exceed
ing 3500 stitches per minute for the first two or three days, af
ter which they can be driven up to their maximum speed of 4200
stitches per minute, depending upon the nature of the work and the
ability of the operator.