SINGER 95-100 - Manual (Page 13)

11
upper Threading
Pass the thread from the unwinder, or from the spool on the
spool pin on the top of the machine, from right to left through
£/2639
Fig.15. Upper Threading
the top hole (1) in the thread retainer, from left to right
through the center hole (2) in the thread retainer, and from
right to left through the bottom hole (3) in the thread retainer,
down under and from right to left between the tension discs (4),
into the thread take-up spring (5), under the slack thread regu­
lator (6), up and back of the wire thread guide (7), up and from
right to left through the hole in the end of the thread take-up
''lever (8), down through the thread guide (9), down through the
thread eyelet (10), Into the thread guide (ll), and from left to
right through the eye of the needle (12). Draw about two Inches
of thread through the eye of the needle with which to commence
sewlno:.