SINGER 95-100 - Manual (Page 14)

12
To Prepare for Sewing
Vlth the left hand hold the end of the needle thread, leaving
It: slack: fГОШ the hand to the needle^ turn the balance wheel over
Fig.16. Drawing Up the Bobbin Thread
toward you until the needle moves down and up again to its highest
point, thus catching the bobbin thread; draw up the needle thread
and the bobbin thread will come up with it through the hole in the
throat plate (see Fig.16). Lay both threads back under the pres-
ser foot.
To Commence Sewing
Place the material beneath the presser foot, lower the presser
foot and commence to sew, turning the balance wheel over toward
you. ■ .
To Remove the Work
Let the thread take-up lever rest at its highest point, raise
the presser foot, draw the work back and cut the threads close to
the goods.