SINGER W7317 - Manual (Page 12)

8. THREADING THE MACHINE
11 Turn the balance wheel toward you until needle bar comes
to its highest position.
2) Place a spool of thread on spool pin on the arm cover.
3) Lead the thread over and through the arm thread-guide
(A,). (Fig. 12).
4) Pull down to the tension disc (B) and between them from
right to left, and up.
5) Hook the check spring (O and retaining bar (D).
6) Pull up into the eyelet of thread take-up lever (E) from
right to left.
7) Draw down through, wire guides of thread protector (F) &
(Gi. and needle clamp thread guide (H).
8) Thread the needle from left to right (I) and hang free
about 3 inches of thread.
YOU ARE NOW READY TO SEW.
11