The adjustable cording and zipper foot, Sewing in zipper, 17 the adjustable cording and zipper foot – SINGER WS1112 User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
17
THE ADJUSTABLE CORDING AND ZIPPER FOOT
This attachment is used to make and insert
covered cording, and to sew in zippers.
Loosen thumb screw (Fig. 26) to slide foot
to either right or left of needle.
CORDING. Fold bias strip of fabric over
cord. Loosen thumb screw and set foot so
needle is centered in needle hole. Machine
baste cord in place (Fig. 27. ).
To sew covered cord to material, reset adjustable foot so
needle stitches closer to cord and on edge of base fabric.
SEWING IN ZIPPER
Fig. 28
Loosen thumb screw and slide foot so needle enters center of
needle hole. Guide metal of zipper along edge of foot (Fig. 28).
Stitching should be close to zipper to allow easy opening and
closing. Adjust to sew from either right or left side, whichever is
more convenient.