Placing of pattern cam for embroidery sewing – SINGER WS1112 User Manual

Page 12

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

4ft:

Pattern Cam and box

PLACING OF PATTERN CAM FOR

EMBROIDERY SEWING

1) Use regular zigzag pressure

foot and needle plate.

2) Open the cam cover lid ®.

Fig. 20.

3) Set buttonhole dial to M

position on panel.

4) Turn zigzagicontrol diallto

position 5 this permits the

insertion of cam on to the

spindle ®. Revolve cam, pressing

down slightly tmtil hole in bottom surface is fitted over pin ®,

5) Close cam cover lid and return zigzag Control dial to "0"

position.

6) Set stitch length between O and 1 for effect desired the shorter

the stitch length the greater the density of pattern sewn.

Needle position can be set at left (L), middle (M) or right (R).

Each position alters the basic stitching line and designs sewn.

IMPORTANT When using Cam |20 (blind hem cam) for blind

hemming, set needle position lever to "R" position.

Fig. 20