Compaq 3000 - Manual (Page 14)

RAID Array 3000 Controller Shelf
1–2 EK–SMCPQ–UG. C01
NOTE
The Device Expansion Shelf (DS-SWXRA-GN)
must have a revision level of B01 (or higher) to
operate with the RAID Array 3000 Controller Shelf.
Also, the Personality I/O module supplied with the
shelf (part no. 70-33067-02) must have a mini-
mum revision level of H01 or higher.
The Controller Shelf and the accompanying Device Expansion Shelves are in-
stalled in a standard RETMA or metric rackmount cabinet design. The Device
Expansion Shelves are typically mounted directly above the Controller Shelf in
the cabinet. Each shelf is supplied with a bracket mounting kit to secure the unit
into the desired cabinet design. The bracket kit for a metric cabinet is optional
and must be ordered separately.
Figure 1–1 RAID Array 3000 Controller Shelf
SHR-1034