Sears 385. 17526 - Manual (Page 8)

SECTION 2. PREPARE THE MAHCINE FOB SEWING
Set Up the Machine
o Plug in the Machine and Switch on the Power e Foot Control Use
NOTE: Before inserting the plug into your
machine, be sure the power switch is OFF.
1. Check your outlet to be sure it is a 110 to 120 Volt
AC outlet.
2. Insert the machine plug into the three-prong
outlet, as shown. It will only fit one way.
3. Insert the power supply plug into the outlet.
4. Push the power switch to turn on the power
and sewing light.
SAFETY FEATURE;
Your machine will not operate unless the
power switch Is turned on. If you are Inleraipted
or stop sewing, turn off the power switch to
prevent injury to children.
you sew.
To increase speed, gently press down with
the ball of your toot.
To decrease speed, release your foot pres­
sure slightly.
NOTE, The foot control is sensitive and will
Increase or decrease your sewing
speed immediately.
Practice on a scrap of fabric to
regulate your sewing speed to your
taste and needs.