Sears 385. 17526 User Manual
Page 58
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTION 3. LEARN THE STITCHES
Buttonhole Making (continued)
c. Stop sewing at the right stitch.
marking of the buttonhole,
c. Stop sewing at the right stitch.
NOTE;
When sewing at the edge ot fabric, set
sliding buttonhole toot as illi^trated
and sew in reverse
c. Stop sewing at the left stitch.
d. Raise the presser toot, and draw
the fabric away from you. Cut both
the needle and bobbin threads
leaving about 10 cm (4") thread
ends. Draw the needle thread to
wrong side of fabric by pulling the
bobbin thread.
Then, knot the threads.
56