Sears 385. 17526 - Manual (Page 67)

SECTION 5. CARE FOR THE MACHINE
Clean the Hook Race and Feed Dogs Oiling the Machine
1. Unplug the machine and remove
the presser foot and needle.
2. Remove the bobbin cover plate.
3. Remove the screw on the left side
ol the needle with the large screw
driver.
4. Remove the needle plate.
5. Take out the bobbin. Lift up the
bobbin holder and remove it.
6. Use the ling brush to clean the teed 7.
dogs, hook race and bobbin holder.
Also use a soft, dry cloth.
Line up the triangle, marks and
position the bobbin holder so the
notch fits next to the stopper in the
hook race.
Open face cover plate and oil two points as shown below at least once a year. One
or two drops of oil is sufficient.
Remove excess oil, otherwise it may stain fabrics.
extended time, oil it before sewing.
Use good quality sewing machine oil.
No other oiling is required
Above points are only area which
require oiling on this machine.
65