Sears 10062603 - Manual (Page 14)

Electronic Controls
To Set Or Change The Temperature In The Freezer
The control has nine settings, from ‘1’
(the warmest) to ‘9' (the coldest) The
best food storage temperature is In the
0° to + 2° F range Start by program­
ming your controls as follows:
1 Press the START pad (ELECTRONIC
TEMPERATURE CONTROL)-
2 Press the FRZ TEMP pad- This tells
the control panel you want to set the
temperature in the freezer
5 Load food in the freezer. Allow 24
hours for the freezer to cool after the
unit is installed, before checking food
tempetaiures. After the 24 hour
The starting temperature setting in
the freezer is level 5
Press the WARMER pad or COLDER
pad to raise or lower the temperature
setting one level at a time, Continue
to hold the WARMER pad or
COLDER pad down to raise or lower
the temperature more than one level
at a time
or
Cofurfttii?- E
« • « « * * « * « « « * * * • * « » i
Raises Or Lowers
Temperature Setting
One Level At A Time
Lowers Temperature
Setting More Than
One Level At A Time
Raises Temperature
Setting More Than
One Level At A Time
period check food temperature as
instructed on page 18. Adjust the
control as needed, one level at
a time.
VACATIOM MODE
The Vacation Mode is ideal for when
you will be away from your home for an
extended amount of time, but still wish
to preserve the food in your refrigerator. During this mode the refrigerator will
defrost less often, saving energy
and money
14
To Start The VACATIOW Mode
1 Press the START pad (ELECTRONIC
TEMPERATURE CONTROL)
2 Press the VACATION pad The vaca­
tion indicator light will come on
acknowledging your command.
_ Vacation Indicator Light Will Come On indicating
™ Vacation Mode is Now On
To Cancel The VACATIGN Mode
1 Press the START pad (ELECTRONIC
TEMPERATURE CONTROL),
2 Press the VACATION pad again. OR
3. Open either the refrigerator or
freezer door
.etecTRotòC':
or Cancel Vacation Mode
Open DoQf