Lectronic controls, Probrammmg – Sears 10062603 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

lectronic Controls
eucTfìONìc
ГШРЁЙАПЖ ■
cowmoi
THERMOSTATIC REFRIGERATOR CONTROL
An electronic thermostatic sensor mea
sures refrigerator air temperatures con
stantly and automatically lets fn more
cold air if temperatures rise as iittle as
1Va°F from your setting
PROBRAMMmG
YOUR
TEMPERATURE SETTINGS
With the Electronic Control, you can
precisely control the temperature in the
refrigerator and freezer sections without
even opening the doors. The freezer
temperature and the refrigerator tem-
•^erature may be changed independent
one another. The temperature of
REFRSSERATOR
each can be set at one of nine tempera
ture levels. One (1) being the warmest
and nine (9) the coldest., When chang
ing the temperature, the temperature
indicator lights will be on The indicator
itghts will teil you whether the freezer or
refrigerator temperature is being
changed and what level the tempera
ture is currently at.
To Set Or Change The Temperature In The Refrigerator
The Control has nine settings, from '1 '
(the warmest) to '9’ (the coldest). The
best food storage temperature is in the
38® to 40®F range. Start by program
ming your controis as follows:
1 Press the START pad (ELECTRONIC
TEMPERATURE CONTROL).
2. Press the REF TEMP pad. This tells
the control panel you want to set the
temperature in the refrigerator.
ТЕШЁЙАШЙМ-.
commi
£i£OTRamo
тЕМРедАгияе
crntmoi...
4”
or
or
3. The starting temperature setting in
the refrigerator is level 5.
4. Press the WARMER pad or COLDER
pad to raise or lower the temperature
setting one level at a time. Continue
to hold the WARMER pad or
COLDER pad down to raise or lower
the temperature more than one level
at a time
Raises Or Lowers
Temperature Setting
One Level At A Time
CopiihuB 50 Pisss Dawf>
Lowers Temperature
Setting More Than
One Level At A Time
Raises Temperature
= Setting More Than
One Level At A Time
Load food in the refrigerator Place a
thermometer in a glass of water in
the middle of the refrigerator section,
making sure that air can flow around
it. (This will be used later to check
food temperature.) Alter the unit is
installed, allow 24 hours for the refrig
erator to cooi Check food tempera
ture as instructed orr page 18. Adjust
the control as needed, one level at
a time.
13