Your bag of parts will consist of the following, Assembly – Sears 917.299642 User Manual

Page 6

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Text mode
Original mode

ASSEMBLY

TO ASSEMBLE YOUR TILLER YOU WILL NEED:

(1) ultlily knife
(1) wire culler
(1) lire pressure gauge
(1) pair of pliers
(1) screwdriver
(1)9/16" wrench
(1) ratchet
(1) socket extension
(1)9/16" socket

OPERATOR'S POSITION

The right hand (R H.) and left hand (L,H.) sides of your
Tiller are determined from the Operator’s Position while
standing behind Tiller

YOUR BAG OF PARTS WILL CONSIST OF THE FOLLOWING:

(1) Owner's Manual

(1) Cable Clip

(2) Carriage Bolts 3/8-16 UNC x 1 Gr, 5

(2) Center Locknuts 3/8x16 UNC

(1) Flat Washer 13/32 x 1 x 11 Ga.

(2) Handle Locks