Sears 917.25597 User Manual
Sears Gardening equipment
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Table of contents
Document Outline
- A.
- A
- I. GENERAL OPERATION
- II. SLOPE OPERATION
- III. CHILDREN
- IV. SERVICE
- PRODUCT SPECÎFICATÎONS
- CUSTOMER RESPONSIBILITIES
- LIMITED TWO YEAR WARRANTY ON ELECTRIC START RIDING EQUIPMENT
- LIMITED 90 DAY WARRANTY ON BATTERY
- TABLE OF COMTENTS
- ENGINE
- PERFORMANCE
- Parts packed separately in carton
- Parts bag contents not shown full size
- TOOLS REQUIRED FOR ASSEMBLY
- TO REMOVE TRACTOR FROM CARTON
- BEFORE ROLLING TRACTOR OFF SKID
- HOW TO SET UP YOUR TRACTOR
- PREPARE BATTERY (See Fig. 3)
- INSTALL SEAT (See Fig. 4)
- CHECK TIRE PRESSURE
- CHECK BRAKE SYSTEM
- INSTALL MOWER AND DRIVE BELT (See Fig. 5 and 8)
- CHECK DECK LEVELNESS
- CHECK FOR PROPER POSITION OF ALL
- INSTALL BATTERY (See Figs. 6 and 7)
- READ THIS OWNER’S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR.
- TO SET PARKING BRAKE (See Fig. 9)
- STOPPING (See Fig. 9)
- TO USE CHOKE CONTROL (See Fig. 9)
- TO USE THROTTLE CONTROL (See Fig. 9)
- TO MOVE FORWARD AND BACKWARD (See Fig. 9)
- TO ADJUST MOWER CUTTING HEIGHT (See Fig. 9)
- TO ADJUST GAUGE WHEELS {See Fig. 10)
- TO OPERATE MOWER {See Figs. 8 and 9)
- TO OPERATE ON HILLS
- TO TRANSPORT
- BEFORE STARTING THE ENGINE CHECK ENGINE OIL LEVEL {See Fig. 12)
- ADD GASOLINE
- TO START ENGINE (See Fig. 9)
- MOWING TIPS
- BEFORE EACH USE
- BRAKE OPERATION
- BLADE CARE
- BLADE REMOVAL (See Fig. 14)
- TO SHARPEN BLADE (See Fig. 15)
- TRANSAXLE COOLING
- CHECK TRANSAXLE OIL LEVEL (See Fig. 16)
- BATTERY (See Fig. 17)
- LUBRICATION
- TO CHANGE ENGINE OIL (See Figs. 18 and 19)
- CLEAN AIR SCREEN (See Fig. 20)
- CLEAN ENGINE COOLING FINS (See Fig. 20)
- MUFFLER
- SPARK PLUGS
- IN-LINE FUEL FILTER (See Fig. 22)
- TRACTOR
- TO REMOVE MOWER (See Fig. 23)
- TO LEVEL MOWER HOUSING
- TO REPLACE MOWER DRIVE BELT
- TO REPLACE MOWER BLADE DRIVE BELT (See Fig. 28)
- TO ADJUST ATTACHMENT CLUTCH (See Fig. 29)
- TO ADJUST BRAKE (See Fig. 30)
- TO REPLACE MOTION DRIVE BELT (See Fig. 31)
- TO ADJUST STEERING WHEEL ALIGNMENT
- FRONT WHEEL TOE-IN ADJUSTMENT
- FRONT WHEEL CAMBER
- TO REMOVE WHEEL FOR REPAIRS
- TO START ENGINE WITH A WEAK BATTERY (See Figs. 35 and 36)
- TO REPLACE HEADLIGHT BULB
- INTERLOCKS AND RELAYS
- TO REPLACE FUSE
- TO ADJUST ATTACHMENT LIFT SPRING (See Fig. 37)
- TO REMOVE HOOD AND GRILL ASSEMBLY (See Fig. 38)
- TO ADJUST THROTTLE CONTROL CABLE (See Fig. 39)
- TO ADJUST CHOKE CONTROL (See Fig. 40)
- TO ADJUST CARBURETOR (See Figs. 41 and 42)
- STORAGE
- TROUBLESHOOTING POINTS
- TROUBLESHOOTING POINTS