Sears 315.10186 - Manual (Page 6)

SYMBOLS
Important: Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper
Interpretation of these symbols will allow you to operate the tool better and safer.
SYMBOL NAME DESIGNAT10N/EXPLANAT1ON
V Volts Voltage
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watt Power
min Minutes Time
Alternating Current Type of current
— Direct Current Type or a characteristic o1 current
no No Load Speed Rotational speed, at no load
HI Class II Constmctlon Double-Insulated construction
..Vmln Per Minute Revolutions, strokes, surface speed, orbits etc., per minute
A
Safety Alert Precautions that Involve your safety
Read The Operator's Manual
To reduce the risk of injury, the user must read and understand
the operator's manual before using this product.
0
Eye Protection
Mvays wear safety goggles or safety glasses with side shields
and a full face shield when operating this product.
Wet Conditions Alert Do not expose to rain or use in damp locations.
The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the explanations
with them, deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any
danger. The instructions or warnings they give are not substitutes for proper accident prevention measures.
SYMBOL MEANING
DANGER: Indicates an imminently hazardous situation, which, If not avoided, will result In death or
serious injury.
WARNING: Indicates a potentially hazardous situation, which, if not avoided, could result in death or
serious injury.
CAUTION; Indicates a potentfalfy hazardous situation, which, if not avoided, may result in minor or
moderate Injury.
CAUTION: (Without Safety Alert Symbol) IrKilcates a situation Otat may result in property damage.