Sears DESTINY PLUS 204.3699969 - Manual (Page 8)

G. ACTIVATING THE CLEANING WAND
The DESTINY® PLUS vacuum cleaner’s Handle is able to turn
itself into a Cleaning Wand with 10 feet of reach.
1. To activate the Cleaning Wand, first put the machine in its
upright position.
2. Press the Wand Release Button located at the top of the
unit behind the On/Off Switch. {Figure 9)
3. Detach the Handie from the top of the machine by pulling
the Handle straight up, then pull-out the Cleaning Wand
which resides inside the Hose. Any of the attachments can
be now inserted into the Handle-end. (Figure 10)
4. To return the machine to its Upright Operating Mode, simply
reverse the order of activity. That is: Push the Cleaning
Wand back inside the Hose. Then, engage the bottom
handle-hole over its mating post at the rear of the top of the
machine.
OPERATION
Helpful Hint
When using №ie Wand, the DESTINY^ PLUS machine can
easily be moved by holding the wand in one hand and, with
the other hand, grasping the Carrying Handle and tilting
the machine onto its rear wheels. (Figure 11)
H. 3 ON BOARD ATTACHMENTS
The DESTINY® PLUS vacuum cleaner carries three handy
attachments on its base. (Figures 1 & 12) They are:
A Crevice Tool to help you get at the most difficult nooks
and crannies.
A Dusting Brush so you can vacuum sofas, drapes,
pillows, etc.
A Floor Nozzle with an air flow adjustment feature for
cleaning either carpeted or hard floor surfaces.
The Floor Nozzle is stored on the machine in the Floor Nozzle
Holster. (Figures 1 & 13)
I. ATTACHMENTS TO HOSE
The attachments can be fitted onto the end of the Cleaning
Wand as per Section G, or for added versatility, inserted
directly into the Hose-end as follows:
1. Activate the Cleaning Wand as per Section G.
2. Slide the Metal Tube of the Cleaning Wand as far out of the
Hose as it will freely go.
CREVICE
TOOL
DUSTING BRUSH
FLOOR NOZZLE
AIR FLOW
ADJUSTMENT
RING
FIGURE 12