E. removing a used hepa filter cartridge, F. inserting a new hepa filter cartridge, Maintenance – Sears DESTINY PLUS 204.3699969 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
MAINTENANCE
E. REMOVING A USED HEPA FILTER
CARTRIDGE.
Replace filter when button pops up and shows red while
vacuuming. {Fig. 25) The Filter Cartridge shouid last for more
than a year when the machine is used for normal household
purposes.
1. Unplug the machine.
2. Rotate the Lock Tab at the rear of the Housing Cap to
unlock the Cap. (Figure 26)
3. Pivot the Cap up from the Lock Tab end and slide Cap
fonward and off the Filter Housing. (Figure 27)
4. Grasp the Piastic Strap on the top of the Fiiter Cartridge and
pull up to remove the Cartridge. Discard Cartridge into a
trash can.
For a repiacement cartridge, contact your nearest
authorized service center.
F. INSERTING A NEW HEPA FILTER
CARTRIDGE.
1. Unplug the machine.
2. When handling the new fiiter cartridge be very carefui not to
damage or tear the pieated fiiter.
3. Slide the Cartridge down inside the Filter Housing until it
touches the bottom of the Housing. The arrow on the top of
the Cartridge must face the front of the Filter Housing.
4. Assemble the Housing Cap onto the Filter Housing by
reversing the procedure of paragraph E.3. That is, slide the
Housing Cap onto the front of the Filter Housing to engage
the underside lip of the Cap onto the small ledge at the top
front of the Filter Housing. (Figure 28) Once engaged, pivot
the Cap down onto the top of the Filter Housing and rotate
How to extend the life of your
HEPA Absolute Air filter
Your HEPA Absolute Air filter operates best when you use
it under normal household cleaning conditions like
vacuuming living rooms, hallways, bedrooms, kitchens,
etc.
CAUTION: If you leave the HEPA filter cartridge in for
abnormal domestic cleaning chores, such as for
vacuuming ash from a fireplace or sawdust from a
carpentry work area, you will shorten the life of the filter.
To clean these areas use a dust pan and brush for the
excess dirt, then use the vacuum for the residue.
11