Assembly – Sears 536.884821 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ASSEMBLY
TO INSTALL SHIFTER LEVER KNOB
© Itiread the shifter lever knob onto the threaded end
of the shifter lever urrtil it is snug against the hex rait
and the lip is pointed toward the engine. Tghten the
hex nut against the tottom of the shift leverkrrab. (See
Fig. 6.)
TO CHECK/ADJUST CLUTCH
CONTROL CABLES
The contnal cables, Fg. 7, attached to the auger clutch
lever and traction clutch lever may need to be adiusted
before you use your snow thrower,
For instructions on checking or adjusting the control
cables, see To Adjust Clutch Control Cables paragraphon
page 18