Sears 536.884821 - Manual (Page 10)

OPERATION
KNOW YOUR SNOW THROWER
READ THIS OWNER'S MANUAL AND SAFEW RULES BEFORE OPERATING YOUR SNOW
THROWER. Compare the Hhjslrations with your snow thrower to familiarize yourself with the locatbn of various
controls and adpstments. Save this manual for future reference.
AUGER DRIVE
lEVER
SPEED
SHIf=lER
L£VER
WEIGHT
TRANSFER
PEDAL
KUCKPti
HBGHT ADJUST SKIDS
SCRAPER BAR
FIG. 8
SEARS FREE-WHEELING SNOW THROWERS conform to the safety standards of the American National
Standards Institute.
AUGER DRIVE LEVER - Starts and Stops the auger and
impeller (snow gathering and throwing).
TRACTION DRIVE LEVER • Propels the snow thrower
forward and in reverse,
SPEED SHIFTER LEVER - Selects the speed of the
snow thrower (6 speeds forward and 2 speeds reverse).
CRANK ASSEMBLY - Changes the direction of snow
throwing through the discharge chute.
CHUTE DEFLECTOR - Changes the distance the
snow is thrown.
DISCHARGE CHUTE - Changes the height and direction
the snow is thrown.
KLICK PIN “ Changes the track drive from normal to free­
wheel drive, which allowstheunit to be transported easily
'' imih6il'№ ehgirieMing'si ..................... ....... ' '
WEIGHT TRANSFER PEDAL - When engaged (by
lifting up on the upper handle) it helps keep the snow
thrower in contact with the ground, and reduces ride up
on ice and hard-packed snow. When released (by push­
ing down on weight transfer pedal with the ball of your
foot), it eases steering of the snow thrower.
HEIGHT ADJUSTSKIDS-Adjuststhegroundclearance
of the auger housing.
IGNITION KEY - Must be inserted to start the engine.
RECOIL STARTER HANDLE - Starts the engine manu­
ally.
CHOKE CONTROL - Used to start a cold engine.
PRIMER BUTTON - injects fuel directly into the cartxi-
retor manifold for fast starts in cold weather.
''■'iRROTtLE CONTO^^ the engine speed.
10