Sears 536.884821 - Manual (Page 26)

TROUBLE SHOOTING POINTS
TROUBLE CAUSE CORRECTION
OWlcuH Itanlng Dotectivs spaifc plug
Water or cfirt in fuel system
Replace defective plug.
Use carbumtof bowl drain to flush and refill with fresh
fuel.
Engin« runa amitié Blocked fuel lino or tow on hiel Clean fuel line; check hrë supply; add fresh
fuel (gasoline/oS mixture if 2 cyde engine).
Engin« alalia Unit running on CHOKE Move choke lever to OFF position.
Engin« runa arraüealty;
LflM of poiMBf
Water or dirt in fuel system Use cartxireior bowl drain to flush and reflil vnth fresh
fuel.
Carbutator out of adjustment Adjust carburetor
Excesslva vibration Loose parts; damaged impeller Stop engine immedialeiy and disojnrtect spark plug wire
Tighten all bolts and make all necessary repairs If vibration
continues, have the unit serviced by a competent repairman.
Unit falla to propal
llsaif
Klick pins improperly irtstallad
Drive belt loose or damaged
Replace drive belL
IttcortBct adjustment of tractian
drive cable
Adjust traction drive cabie.
Worn Of damaged friction wheel Replace friction wheel.
Unit falla to
dlscharga snow
Auger drive belt kiose or damaged Adjust auger drive ball; replace if damaged.
Auger control catrie not adjusted
COtTECtiy
Adjust auger control cable,,
Shear bolt broken Replace shear bolt
Discharge chute dogged Stop engine immecfiately and dsconnecl spark plug wire
Clean discharge chute and inside of auger housing
Foreign object lodged in auger Stop engine immediately and disconrtect spark plug wire.
Remove object from auger.
Hasdllghi Loose wire connection Tighten connection,.
Bulb burned out Replace headlight bulb.
Unit rid as up Weight transfer disengaged Engage weight transfer system by lifting up on upper handle
until bracket bolts snap into place in upper slots of weight
transfer pedal.
26