Contents of parts bag, Assembly – Sears 536.884821 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ASSEMBLY
THIS SNOW THROWER HAS A TRACK DRIVE SYSTEM EQUIPPED TO GIVE
YOU FREE-WHEELING CAPABILITY
II your snow thrower must be moved without the aid
of
the engine, it wiii be easier to pull the snow thrower
backward by the handles, rather than pushing. For details on how to use the Iree-wheeiing capability, see the
Tradì Drive/Free-Wheel Feature paragraph in the Operation section of this manual
On start up, the track drive system may be tight but will loosen up as the snow thrower is used After first use. check
the track tor tension and adjust if necessary. See the Track Adjustment paragraph in the Service and
Adjustments section of this manual. Check track adjustment and fasteners regularly.
CONTENTS OF SHIPPING CARTON TOOLS REQUIRED FOR ASSEMBLY
1 - Snow thrower completely assembled except for
the crank assembly, and the upper handle, which
is in the folded down posifion.
1 - Parts bag containing:
1 - Owner's manual (not shown) and
Parts shown below:
1 - Knife jto cut carton and plastic ties)
2 -
1/2
inch wrenches (or adjustable wrenches)
2 - 9/16 inch wrenches (or adjustable wrenches)
2 - 3/4 inch wrerrches (or adjustable wrenches)
1 - Pliers (to spread cotter pin)
1 - Screwdriver
CONTENTS OF PARTS BAG
0
Tmmuiimmm
*2 - Spare 1/4-20 x 1-3/4
tn. Hex Hoad Screws
*2 - Spare Spacers
Q
'2 -
Spare 1/4-20 Hex nuts
Knob with Threads
*Non-Assembled Parts
2 " Iginition Keys