Sears 580.7515 - Manual (Page 9)

OPERATION
KNOW YOUR HIGH PRESSURE WASHER
READ THIS OWNER’S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR HIGH PRESSURE WASHER.
Compare the illustrations with your high pressure washer to familiarize yourself with the locations of various controls and
adjustments. Save this manual for future reference.
SPARK PLUG
DETERGENT PICKUP TUBE
AND FILTER
HIGH PRESSURE HOSE
OIL FILL OPENING
PRESSURE
REGULATOR
GUIDE HANDLE
\ ENGINE ON/OFF CONTROL
CUP FOR WAND
STORAGE
WATER INLET
INTAKE SUPPLY FILTER
FEMALE CONNECTOR
MALE CONNECTOR--*®^® \
INLET SCREa<
GUN AND WAND
ASSEMBLY
QUICK-CONNECT
FIG. 8
WIRE SUPPORT
HIGH PRESSURE OUTLET
GASOLINE CAP
RECOIL STARTER
PUMP — Develops high pressure.
PRESSURE REGULATOR — Allows you to adjust the
pressure of the outlet stream
ENGINE ON-OFF CONTROL — Sets engine in starting
mode for recoil starter; turns OFF running engine.
RECOIL STARTER — Used for starting the engine man­
ually.
AIR CLEANER - Dry type filter element limits the amount
of dirt and dust that gets in the engine.
GUN AND WAND ASSEMBLY— Controls the application
of water onto cleaning surface with trigger device. Includes
safety latch.
HIGH PRESSURE HOSE — Connect one end to water
pump and other to spray wand.
INTAKE SUPPLY FILTER — Fitters inlet water supply.
DETERGENT PICKUP TUBE AND FILTER — Mixes water
and detergent in outlet water flow,
HIGH PRESSURE OUTLET — Connection for high pres­
sure hose.
QUiCK-CONNECT — Easy connection for intake water
supply.