Idle fast, Operâtiom – Sears 580.7515 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
OPERÂTiOM
HOW TO USE YOUR WASHER
IF
YOU
HAVE
ANY
PROBLEMS
OPERATiNG
YOUR
PRESSURE WASHER, PLEASE CALL THE PRESSURE
WASHER HELPLINE AT 1-800-222^3136.
STOPP^SCa YOUR PRESSURE ¥#ASHER
i First, move engine throttle lever to “OFF position (Fig
9).
OFF
IDLE FAST
FIG. 10
FIG. 11
V"
FIG. 9
• Simply shutting OFF engine will not release pres
sure in ttio system. Pull the trigger on the spray wand
assembly to relieve ttie pressure in the hose.
NOTE: A small amount of water will squirt out when you
release the pressure.
SPRAY NOZZLES
Your high pressure washer comes equipped witfi an adjust
able nozzle (Fig. 10). Attach nozzle as shown in Fig 10
and HAND TIGHTEN the plastic knob Figure 11 shows the
optional turbo nozzle.
HOW TO USE ADJUSTABLE NOZZLE
Wiffi the adjustable nozzle you can adjust the spray pattern
to be either high pressure or low pressure. You can also
adjust the spray so it is concentrated in a stream pattern or
expanded into a fan pattern Use this nozzle to apply
detergent
■
Pusr
(he
attachment
iorwarci
when
you
wisi'
k
aqiusi the spray to low pressure mode (Fig. 12). Pusi
thé nozzle backward to achieve high pressure.
- Twisting the nozzle adjusts the spray pattern from a
narrow stream to an expanded stream.
» You can also adjust the pressure by turning the pres
sure control knob (Fig 13) to the desired pressure
setting. Turning this knob all the way clockwise pro
duces the highest pressure Do not unscrew the pres
sure control valve more than 3 turns. It will come off
WARNING: NEVER ADJUST SPRAY PATTERN
WHEN SPRAYING. NEVER PUT HANDS IN FRONT
OF SPRAY NOZZLE TO ADJUST SPRAY PAT
TERN.
FIG. 13
NOZZLE iN HIGH
PRESSURE MODE
PUSH NOZZLE FORWARD FOF
LOW PRESSURE MODE AND DE
TERGENT APPLICATION
TWIST NOZZLE TO
EXPAND SPRAY
TWIST NOZZLE TO NARROW
SPRAY STEAM
FIG. 12
10