Fax settings – Canon L90 User Manual
Page 196
9-9
Machine Settings
FAX SETTINGS
3. TX SETTINGS
Sets the transmission features.
1. AUTO REDIAL
Sets whether to redial automatically when the other line is busy
or a transmission error occurs. (See Chapter 3, “Sending and
Receiving,” in the Reference Guide.)
ON
Customizes the redial operation.
1. REDIAL TIMES
Sets the number of retries. (1TIMES–10TIMES (2TIMES))
2. REDIAL INTERVAL
Sets period of time before redialing. (2MIN.–99MIN. (2MIN.))
OFF
After the first attempt at dialing fails, redialing is not attempted.
2. DIALING LINE CHCK
Sets whether to check the telephone line condition.
OFF
ON
–
–
4. RX SETTINGS
Sets the reception features.
1. FAX/TEL OPT. SET
Sets the optional items in the
“Sending and Receiving,” in the Reference Guide.)
RING START TIME
Sets the time the machine takes to check whether a call is a fax
or a voice call. (4SEC–30SEC (6SEC))
F/T RING TIME
Selects the ring length for voice calls. (10SEC–45SEC (22SEC))
F/T SWITCH ACTION
Selects whether the machine switches to the receive mode after
the ring time has elapsed, or whether if disconnects the call.
RECEIVE
DISCONNECT
–
–