Winco Mfg. 2588 - Power Designer Blood Drawing Chair - Padded vinyl - Manual (Page 5)

5
IMPORTANT - PLEASE READ
1. READ AND FOLLOW ALL DIRECTIONS.
2. Chair should ALWAYS be positioned on level surface.
2. Children MUST be supervised at all times when near chair.
3. DO NOT stand on chair.
4. DO NOT use movable arm as a restraint device
4. DO NOT put hands, feet or clothing into any openings when changing positions on chair
Attendant MUST confirm that users arms, legs, hands and feet are safe while changing chair
positions or SERIOUS INJURY MAY RESULT.
4. STAY CLEAR of moving parts.
5. DO NOT use chair for transporting in or with ANY type of vehicle or trailer. Winco chairs
have not been tested or approved for use by an occupant in any type of vehicle or trailer.
6. NEVER use the chair arms or backrest as a seat; SERIOUS INJURY or damage may occur.
7. Failure to completely tighten the seat mounting screws COULD RESULT IN INJURY.
8. Periodically check the tightness of all nuts, bolts and screws.
8. Immediately REMOVE FROM SERVICE; Any chair with broken parts, torn upholstery, or other
mechanical or visible damage.
9. USE ONLY WINCO AUTHORIZED REPLACEMENT PARTS.
10. NEVER EXCEED the recommended weight capacity - see pages 6.
11. SAVE THESE INSTRUCTIONS for future reference and training.
GROUNDING INSTRUCTIONS:
This product must be grounded. If it should malfunction or breakdown, grounding provides a path of least
resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord
having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and
ordinances.
DANGER - Improper connection of the equipment-grounding conductor can result in a risk of electric
shock. Check with a qualifi ed electrician or serviceman if you are in doubt as to whether the product is
properly grounded. Do not modify the plug provided with the product - if it will not fi t the outlet, have a
proper outlet installed by a qualifi ed electrician.
This product is for use on a nominal 120-volt circuit and has a grounding plug. Make sure that the product
is connected to an outlet having the same confi guration as the plug. No adapter should be used with this
product.
For an added level of safety; Winco recommends the use of a 120 volt GFCI (ground fault circuit
interruptor) outlet.