Viconics VT7600 Installation Guide (Current Release 5000 Series PIR Ready) - Manual (Page 11)

11 | PIR Ready VT7600 Series-Installation Guide
-28 -18 151.6239 -8 18 48.7042 12 54 17.9636 32 90 7.4182 52 126 3.3568
-27 -17 142.7211 -7 19 46.1933 13 55 17.1440 33 91 7.1150 53 127 3.2333
-26 -15 134.3971 -6 21 43.8268 14 57 16.3665 34 93 6.8259 54 129 3.1150
-25 -13 126.6109 -5 23 41.5956 15 59 15.6286 35 95 6.5499 55 131 3.0016
-24 -11 119.3244 -4 25 39.4921 16 61 14.9280 36 97 6.2866 56 133 2.8928
-23 -9 112.5028 -3 27 37.5056 17 63 14.2629 37 99 6.0351 57 135 2.7886
-22 -8 106.1135 -2 28 35.6316 18 64 13.6310 38 100 5.7950 58 136 2.6886
-21 -6 100.1268 -1 30 33.8622 19 66 13.0307 39 102 5.5657 59 138 2.5926
S3010W1000 remote wall mounted
temperature sensor, dip switch location
S2000D1000, remote duct mounted temperature
sensor c/w junction box.
This sensor can be used for:
•
Remote return air temperature sensing with the
sensor mounted on the return air duct.
• Outside air temperature sensing with the
sensor installed in the fresh air plenum.
• Supply air temperature sensor
S2060A1000, remote averaging duct mounted temperature sensor c/w junction box.
This sensor can be used for:
•
Remote averaging return air temperature sensing with the sensor mounted on the return
air duct.
• Outside air temperature averaging sensing with the sensor installed in the fresh air
plenum.
• Mixed air temperature averaging sensor for economizer models with the sensor in the
mixing plenum.
S2020E1000, outdoor air temperature sensor
This sensor can be used for:
•
Outside air temperature sensing with the sensor installed directly exposed to the elements.
• Sensor uses a water resistant NEMA 4 ABS enclosure for outdoor applications.
1 2
ON
Location of dip