VACUUBRAND CVC 3000 E - Manual (Page 25)

page 25 of 75
connection plug of the power supply jacks for connection of
VACUU•BUS components
(e.g., coolant valve)
serial interface
RS-232 C
Rear side CVC 3000 E
venting connection
vacuum connection
to pump
rating plate
Selection knob
• Press to reach the set-up menu of the function
• Turn to choose the parameter you want to modify
• Press to select the parameter you want to modify
• Turn to change the set value of the parameter
• Press to confirm change of value and to reach further
parameters, or to leave the set-up menu
Attention: Do not assemble or remove plug connections off-axis!
Orient the plug correctly before inserting. To connect additional
components use VACUU•BUS Y-adapters and extension cables. If
an external pressure transducer is connected, it is recognized auto-
matically. Further information on how to use several sensors simul-
taneously is available upon request.
vacuum connection
to application
solenoid operated
in-line valve
spring clip for
assembly in
cut-out