VACUUBRAND MD 1C VARIO-SP - Manual (Page 26)

page 26 of 87
Type
MD 1C
MD 1C +
AK + EK
MZ 1C
MD 1C
VARIO-SP
Motor protection
thermal cutout, manual
reset (e)
MD 1 C/US: additional
fuse 2.5AT
current limi-
tation
(temperature
sensor on
the circuit
board)
Degree of protection IEC 529
IP 44 (f)
MD 1C + AK + EK: IP 40
IP 20
Inlet
hose nozzle for tubing I.D. 3/8”
(hose nozzle DN 10 mm)
Outlet
hose nozzle for tubing I.D. 5/16”
(hose nozzle DN 8 mm)
MD 1C + AK + EK:
hose nozzle for tubing I.D. 3/8”
(hose nozzle DN 10 mm)
Coolant connection (waste
vapor condenser, only ”AK + EK”)
hose nozzle for tubing I.D. 1/4” - 5/16”
(hose nozzle DN 6-8 mm)
Maximum permissible pres-
sure of coolant at waste vapor
condenser (only ”AK + EK”)
psi
(bar)
87 (absolute)
(6 (absolute))
Permissible range of coolant
temperature (waste vapor
condenser, only ”AK + EK”)
°F
(°C)
5 to 68
(-15 to +20)
Volume of catchpot
(only ”AK + EK”)
quarts
(ml)
0.52
(500)
A-weighted emission sound
pressure level (g)
(uncertainty K
pA
: 3 dB(A))
dB(A) 45 40 42
Dimensions L x W x H
approx.
MD 1C C/US
MD 1C + AK + EK
in
(mm)
in
(mm)
in
(mm)
12.4 x 5.6 x
6.9
(316 x 143 x
175)
12.8 x 5.6 x
6.9
(326 x 143 x
175)
12.4 x 9.4 x
15.9
(316 x 239 x
405)
12.2 x 5.6 x
7.9
(311 x 143 x
200)
-
-
-
-
9.3 x 5.6 x
6.9
(235 x 143 x
175)
-
-
-
-