TruTrak EFIS AP (8300-057C) - Manual (Page 30)

TruTrak Flight Systems 28 EFIS Autopilot Installation Manual
AP I Quick Reference
Button labels – White - mode is OFF, Green - mode is ON
Click – Momentarily push and release any knob or button
Press – Push and hold any knob or button for 2 seconds and release
Enter – Click knob labeled [ Enter ]
Basic Operation
Barometer adjust – Rotate right knob
Track bug adjust – Rotate left knob
Altimeter bug adjust – Click ALT button, bug will synchronize to nearest 100 feet
Rotate right knob to select new altitude (Depress knob for 100 ft resolution)
Click [ Enter ]
Altimeter bug cancel – Click ALT button
Dimmer function – Click left knob to enter setup mode Rotate left knob to set desired brightness
Click [ Enter ]
Nav mode – Click NAV button
Nav mode cancel – Click NAV button or rotate left knob (Track bug adjust)
Autopilot and Flight Director Operation
Autopilot on / off – Click AP / FD button – on, Click AP / FD button – off
Flight Director on / off – Press AP / FD button – on, Press AP / FD button – off
Track select – Rotate left knob
Nav mode – Click NAV button
Nav mode cancel – Click NAV button or rotate left knob (Track select)
Altitude select – Click ALT button, bug will synchronize to (only available in FD) nearest 100 feet
Rotate right knob to select new altitude (Depress knob for 100 ft resolution)
Click [ Enter ] (VS is fixed at +/- 500 FPM)
Barometer adjust – Rotate right knob
Dimmer function – Click left knob to enter setup mode. Rotate left knob to set desired brightness
Click [ Enter ]
Arrival Transition
(Note: Operation is the same regardless of AP or FD being on or off)
Arrival Transition – Click CRS
Rotate left knob to set HSI course pointer to selected runway direction
Click APPR
April 2009 8300-057 Rev D