Toa C-BC704W - Manual (Page 10)

10
Sealing points
4. Secure the cable bushing to the Wall Mounting Bracket, then waterproof 2 points shown in the figure below
with silicone sealant material.
5. Replace the connectors removed in Step 1 on the end of the composite cable.
Note: Pay attention to the correct cable connections. Incorrect wiring at the connectors may cause damage
to the connected equipment.
Input connector
Power supply connector
1 VIDEO
2 GND
3 RS485 +
4 RS485 -
5 GND
6 AL1
7 AL2
8 AL3
9 AL4
Power supply connector
Terminal No. Terminal name Cable color
Terminal
treatment
1 24V AC Red
AC adapter jack
2 24V AC Black
Input/Output connector
Terminal No. Terminal name Cable color
Terminal
treatment
Yellow
Shield
BNC jack
Green Bare end
Blue
White
Brown
Purple
Orange
Gray
Bare end
Bare end
Bare end
Bare end
Bare end
Bare end