Toa PW-1430SW - Manual (Page 9)

9
7. INSTALLATION
Be sure to observe the following instructions.
Failure to do so may cause the unit to fall, possibly resulting in personal
injury.
• Use bolts and nuts that are appropriate for the material and structure
at the installation location.
• Securely tighten all bolts.
• Be sure to use at least 4 bolts to secure the mounting bracket to the
installation location.
wARNING
7.1. Speaker Installation
Step 1. Remove the mounting bracket from the unit.
Remove the bolts on the unit’s both sides to detach the bracket.
Step 2. Secure the mounting bracket to the installation location.
Mounting bracket
2
3
4
Holes for installation
Holes for installation
Cable entry holes
Speaker lead
Separately prepare
these bolts and nuts.
Note
Bolts and nuts for fixing the mounting
bracket to the installation location are
not included. Separately prepare them.
After removing the bolts, detach the
protection sheet inserted between
the mounting bracket and the bolts on
each side of the unit.
The removed protection sheets are no
more used at speaker installation.
Protection
sheet
Protection
sheet
Remove this pro tect ion
she et b efore inst alla ttion
Step 3. Secure the speaker to the mounting
bracket.
Use the bolts removed in step 1 above.
Step 4. Pass the speaker lead through one of
3 cable entry holes in the mounting
bracket.