Toa SR-PP4 User Manual
Page 16
15.2. Extension Plate SR-EP4WP (optional)
The SR-EP4WP is used to join multiple SR-S4LWP or SR-S4SWP speakers. One complete set consists of 2
brackets.
15.3. Protection Pad SR-PP4 (optional)
When the SR-S4LWP or SR-S4SWP speaker is installed so that its bottom edge is located at head height,
people could bump their heads directly against the speaker and suffer injuries. Affixing this protection pad to
the speaker's bottom surface helps reduce the impact and chance of injury.
Notes
• The fixing screws are not supplied with the unit. Use the attached screws on both sides of speaker.
• The design and specifications are subject to change without notice for improvement.
Note: The design and specifications are subject to change without notice for improvement.
Number of Speaker to be Jointed
Max. 3 (when using 2 sets of SR-EP4WP)
Finish
Stainless steel (SUS304)
Dimensions
140 (w) x 220 (h) x 4 (t) mm
Weight
900 g
Finish
Synthetic rubber, black
Dimensions
168 (w) x 59 (d) x 8 (t) mm
Weight
40 g
Traceability Information for Europe
Manufacturer:
TOA Corporation
7-2-1, Minatojima-Nakamachi, Chuo-ku, Kobe, Hyogo,
Japan
Authorized representative:
TOA Electronics Europe GmbH
Suederstrasse 282, 20537 Hamburg,
Germany
133-01-437-4B
URL: http://www.toa.jp/