Toa SR-PP4 - Manual (Page 15)

15
15. SPECIFICATIONS
15.1. Line Array Speaker SR-S4LWP, SR-S4SWP
Note: The design and specifications are subject to change without notice for improvement.
• Accessories
Bi-amplifier rating label ................................... 1
Bi-amplifier terminal label ................................ 1
• Optional products
Matching transformer:
MT-S0601
Extension plate: SR-EP4WP
Wall tilt bracket: SR-TB4WP
Wall mounting bracket: SR-WB4WP (Applicable to the SR-S4LWP only)
Protection pad:
SR-PP4
Digital processor: DP-0206
Model No. SR-S4LWP SR-S4SWP
Enclosure Sealed type
Power Handling Capacity Continuous program: 600 W
Rated Impedance 8 Ω
Sensitivity 94 dB (1 W, 1 m) 93 dB (1 W, 1 m)
Frequency Response 70 – 20,000 Hz (when using the optional DP-0206 Digital processor)
Crossover Frequency 3,500 Hz
Directivity Angle Horizontal: 90° Horizontal: 90°
Vertical: 0° (within the range of Vertical: 10°
speaker height)
Speaker Component Low frequency: 10 cm cone-type x 8
High frequency: 2.5 cm balanced dome-type x 24
Connected Cable Direct cable withdrawal from internal speaker: ø8.6 mm,
conductor cross section: 1.25 mm
2 , 4-core cable, 3 m
Water Protection IPX4
Finish Enclosure: Plywood, white, urethan coating
Front grille: Punched stainless steel (SUS304), white, paint
Dimensions 160 (w) x 895 (h) x 255 (d) mm 160 (w) x 892 (h) x 303 (d) mm
Weight 16 kg