Toa HY-CN1W-WP - Manual (Page 4)

Printed in Indonesia
5 3 3 - 0 6 - 1 2
9 - 1 0
5. SUSPENDING JOINED SPEAKERS
5.1. When Suspending Vertically
[Joining 2 HX-5 series]
Suspend a stack of the HX-5 series by 3 wires connected
to the 2 suspension brackets (supplied with the HX-5
series) and the rear plate of the HX-5 series.
[Joining 3 or 4 HX-5 series]
Suspend a stack of the HX-5 series by 4 wires connected
to the 2 suspension brackets (supplied with the HX-5
series) on each of the uppermost and lowermost HX-5
series.
Suspension bracket
(supplied with the
HX-5 series)
Rear plate
Note
For mounting procedure of the suspension bracket, refer to the instruction
manual supplied with the HX-5 series.
Suspension bracket
(supplied with the HX-5 series)
Rear plate
5.2. When Suspending Horizontally
Use 2 wires to suspend each HX-5 series at its suspension
bracket (supplied with the HX-5 series) and rear plate (2
suspension points in total per HX-5 series).
Note
This way of suspension requires the orientation of the rear
plate to be changed.
For mounting procedure of the rear plate and the
suspension bracket, refer to the instruction manual supplied
with the HX-5 series.
6. SPECIFICATIONS
Note: The design and specifications are subject to change without notice for improvement.
HY-CN1B HY-CN1W
Steel plate, black,
semi-gloss, paint
Model No.
Finish
Weight
Product Composition
200 g
Front bar bracket ... 2, Rear bar bracket ... 1
HY-CN1B-WP HY-CN1W-WP
Steel plate, white,
semi-gloss, paint Stainless steel (SUS304),
black, semi-gloss, paint Stainless steel (SUS304),
white,semi-gloss, paint