Toa HY-CN1W-WP - Manual (Page 3)

[Joining HX-5 series]
Set the speakers on their sides, handles facing up.
Step 3. Join the HX-5 series and using the front bar brackets.
Use the removed bolts in Step 2 to attach the front bar brackets.
B A
Bolts can be tightened using either a Phillips screwdriver or a wrench, but be sure to finish the tightening with the
wrench to ensure optimum tightness. Doing otherwise may result in the speaker falling down and causing personal
injury and/or property damage.
WARNING
Step 4. Reattach the front grills to the speaker modules.
Retighten the bolts using the supplied hex head wrench, making sure that the edges the grills remain securely
fitted into their receptacle slots.
Step 5. Attach the rear bar bracket.
Note
When joining 2 HX-5 series that are both set to the 15° mode, also position the bolts on the rear bar bracket to
the 15° mode, thus permitting a total of 30° of continuous joined directivity.
15 ° mode
30 ° mode
45 ° mode
60 ° mode
3
4
5
Front bar bracket mounting position
Rear bar bracket mounting position
Rear bar bracket
Fix the directivity mode at the desired angle.
Rear bar bracket
(component of
HY-CN1 series)
Handle
Front bar bracket
(component of HY-CN1 series)
Front grill
Removed bolts in Step 1
Removed bolts in Step 2
Front bar bracket
Fix the bracket using
the bolts attached to
the speaker system.
HX-5 series A
HX-5 series A
HX-5 series B
HX-5 series
's bar
's bar B