Toa F-2852CU2 - Manual (Page 11)

11
Caution
Before mounting, check to be sure that the speaker's
4 mounting tabs are turned inside the unit as shown
in the figure.
If turned outward, the speaker cannot be inserted
through the mounting hole.
In
Out
Mounting tab
Step 1. Insert the speaker through the mounting hole till it
contacts the ceiling panel. While doing so, avoid
directly touching the speaker's diffuser section.
WARNING
Never hold the tweeter section as a handle to
carry the speaker during installation. If the
tweeter section breaks off, the unit could fall
from an elevated position, resulting in possible
personal injury.
Step 2. Rotate and tighten the mounting tab axis screws (4 places) on the unit clockwise to their full stop in
order to grip the ceiling panel with the mounting tabs.
Tweeter section
Tweeter section
Mounting hole
Mounting tab axis screw
Mounting tab
Use an electric screwdriver to tighten.
(Tightening torque: 6 – 10 kgf·cm)
8. SPEAKER INSTALLATION