Toa DP-L2 v.2.00 - Manual (Page 23)

23
7. CONNECTIONS
Be sure to use the supplied removable terminal plugs (3P, 4P) for connections to the removable terminal
blocks.
7.1. Removable Terminal Plug Connection
Cautions
• Be sure to use shielded cables for audio signal lines.
• Avoid soldering stranded or shielded cable, as contact resistance may increase when the cable is tightened
and the solder is crushed, possibly resulting in an excessive rise in joint temperatures.
Cable end treatment
Connector connections
Step 1. Loosen the terminal screw, then insert
the cable.
Step 2. Retighten the terminal screw. (Pull on
the cable to ensure it is securely
connected.)
Step 3. Mount the removable terminal plug to
the unit.
Tip
Recommended slotted screwdriver type: Screwdriver with 3 mm blade width
7 mm 7 mm
20 mm
Solid or stranded cable Shielded cable
3 mm Bit shape
1
1
2
3
DP-L2's
rear panel
Tightens Loosens
Terminal screw
Slotted screwdriver
Shielded cable
Removable terminal plug
(accessory)
Removable
terminal block